Search Results

Search found 13033 results on 522 pages for '12 04'.

Page 37/522 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Rails3 environment running very slow on Windows XP, Ubuntu 9.04, Ubuntu 9.10

  - by bergyman

  I've tried all three (granted the Ubuntu versions were via VirtualBox with XP as a host, but I gave the images all the available RAM my system has). Loading the rails environment is taking 30-60 seconds. rails console, rake test:units - anything that requires rails to load up. And not just on the first go - every time. I've even used autotest to see if it helps with execution time for unit tests, but it doesn't. Any time I change one test, it still takes 30 seconds to load them, and then about 4 seconds to execute. Has anyone else come across this issue? Has anyone figured out any way to fix this?

  Read the article

• what service to restart for /var/log/auth.log to start

  - by Bond

  Here is a situation since the log files on my server had grown to several Gigabytes I took a backup of directory /var/log and then manually when to each subdirectory of /var/log and the files which were big in size I did cat > /var/log/file_which_is_big press 2 times enter key (basically over wrote those files with a blank space) and then Ctrl+C So basically I over wrote those files to be blank. Now when I open /var/log/auth.log I don't see any entry (which is expected also since I over wrote) but when I exit the SSH session and login again then also I do not see any entry in auth.log is there any way other than rebooting the machine to make sure I keep getting the entries in /var/log/auth.log I am not sure which service writes in this file. This is a Ubuntu 10.04 server.

  Read the article

• Ubuntu 10.04 external monitor problem

  - by Ricky

  I've just installed the 10.04 release on my laptop. I've also installed the nvidia propietary driver as suggested by the system. I've some problem using an external monitor, i'm not able to set the correct resolution using the nvidia-setting utiloty. It doesn't recognize the right resolution of my external monitor. Any advice please? :) I'm a newbie.

  Read the article

• Configure mod_wsgi WSGIScriptAlias with mod_rewrite

  - by Lazik

  I want to redirect ex.com to www.ex.com but I still want www.ex.com/ to point to my app.wsgi without it showing up in the url. When I use the conf below and I go to ex.com, I get a 404 error saying can't find www.ex.com/app.wsgi/ If I change the WSGIScriptAlias / /var/www/vhosts/ex/app.wsgi to WSGIScriptAlias /app.wsgi /var/www/vhosts/ex/app.wsgi Then all my url look like www.ex.com/app.wsgi/blabla/... Is it possible to use some kind of rule to redirect ex.com to www.ex.com and still keeping / as the app.wsgi root? my conf file <VirtualHost *:80> ServerName www.ex.com ServerAlias ex.com *.ex.com RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] WSGIDaemonProcess ex user=www-data group=www-data processes=1 threads=5 WSGIScriptAlias / /var/www/vhosts/ex/app.wsgi <Directory /var/www/vhosts/ex> WSGIProcessGroup ex WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> </VirtualHost>

  Read the article

• Upgrading Ubuntu 9.04 to 9.10 when Update Manager doesn't let you

  - by nickf

  I've been trying to upgrade my installation of Ubuntu 9.04 to 9.10, but all of the instructions I've found haven't been helping. They mostly say to run the update manager and it'll tell you that there's a new distribution ready. Well, mine doesn't say that. Things I've run or checked: update-manager -d says: Your system is up-to-date The package information was last updated less than one hour ago. I've set it to get all new distributions, not just LTS $ cat /etc/update-manager/release-upgrades [DEFAULT] # default prompting behavior, valid options: # never - never prompt for a new distribution version # normal - prompt if a new version of the distribution is available # lts - prompt only if a LTS version of the distribution is available Prompt=normal I'm definitely running 9.04 $ lsb_release -r Distributor ID: Ubuntu Description: Ubuntu 9.04 Release: 9.04 Codename: jaunty Even running the release upgrade from console doesn't help: $ sudo do-release-upgrade Checking for a new ubuntu release No new release found This is running from behind a proxy, but I've set it up such that the regular upgrades and apt-get etc doesn't complain. (export http_proxy=http://myuser:mypass@myserver:8080/) Could you think of anything else which might be stopping me from upgrading?

  Read the article

• ubuntu 12.04 is unresponsive

  - by Andreas Schiemann

  I've been using ubuntu 12.04 for 3 weeks. Today it become unresponsive and I lost stuff I was working on, I had the hand displayed, as if I selected something but in fact never did, but was reading an article online. I finally powered down the machine and then turned it back on. In windows there is the Task Manager where one can see whats taking up all your CPU or RAM, is there a such a program in ubuntu 12.04 and if not, can I install a app that has the same use?

  Read the article

• diskspace in ubuntu

  - by Omkant

  I have installed windows and ubuntu side by side .and given the diskspace of 10GB in an another drive partition.after using two moths i have installed some software to it no it's not starting and writing on the screen that there is no diskspace so could not be started . what can i do now?but at starting time only balckscreen terminal is shown with $ sign . please give me some command to uninstall some program and start using ubuntu or any other way to get rid of it

  Read the article

• Ubuntu - changing another users file permissions

  - by Cameron

  I have setup Ubuntu as a development web server - however I am experiencing problems with file permissions. I have 2 users, user1 and user2, and they both have been put into the group www-data. I have uploaded a new file with user1 so the file is owned by user1 and the www-data group. At present if user2 wants to modify the permissions on that file to say 777 - they cannot. Is there a way to allow any users within a group to be able to modifiy permissions etc.. on this file? I have tried changing umask to 002 and a few other combinations that were suggested without luck.

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• straight to grub prompt on boot

  - by cheshirekow

  I am very lost. I did a fresh install of Ubuntu 10.04 on a laptop. First reboot was fine. I ran all the recommended upgrades, and now every time I start I get just a grub>_ prompt. No error message, just the prompt, and a little banner at the top saying grub's version and telling me that I have minimal bash style editing. I've tried: 1) Re-installing grub via sudo grub-install sda (There is only one disk with only two partitions, one primary, and one for swap) 2) Changed GRUB_HIDDEN_TIMEOUT=10 GRUB_TIMEOUT=30 GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=90" GRUB_CMDLINE_LINUX="rootdelay=90" in /etc/default/grub. No luck. I can boot with the following: grub> set root=(hd0,1) grub> probe (hd0,1) -u c00fadde-f7e8-45e7-a4da-0235605f756 grub> linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235605f756 rootdelay=90 grub> initrd /boot/initrd.img-2.6.32-21-generic grub> boot And then everything seems to be fine from there. From the grub prompt if I try configfile /boot/grub/grub.cfg The screen clears and I get another grub prompt. So, seriously, what could the problem be? edit: Full text of /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=30 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro rootdelay=90 rootdelay=90 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro single rootdelay=90 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ ${timeout} != -1 ]; then if sleep --verbose --interruptible 10 ; then set timeout=0 fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### output of update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done contents of /boot total 14280 -rw-r--r-- 1 root root 640617 2010-04-16 09:01 abi-2.6.32-21-generic -rw-r--r-- 1 root root 115847 2010-04-16 09:01 config-2.6.32-21-generic drwxr-xr-x 3 root root 4096 2010-09-08 02:42 grub -rw-r--r-- 1 root root 7968754 2010-09-02 01:49 initrd.img-2.6.32-21-generic -rw-r--r-- 1 root root 160280 2010-03-23 05:37 memtest86+.bin -rw-r--r-- 1 root root 1687378 2010-04-16 09:01 System.map-2.6.32-21-generic -rw-r--r-- 1 root root 1196 2010-04-16 09:03 vmcoreinfo-2.6.32-21-generic -rw-r--r-- 1 root root 4029792 2010-04-16 09:01 vmlinuz-2.6.32-21-generic

  Read the article

• how to resolve error in ubuntu

  - by bipul

  0 vote down star i m using ubuntu 9.04. when i m running any command like sudo apt-get update ,i get following error message"E: Type 'l.com/ubuntu' is not known on line 45 in source list /etc/apt/sources.list E: The list of sources could not be read. ".due to this problem i m not able to download anything.please help

  Read the article

• How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

  - by Dmitri Toubelis

  I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

  Read the article

• MaxStartups and MaxSessions configurations parameter for ssh connections?

  - by Webby

  I am copying the files from machineB and machineC into machineA as I am running my below shell script on machineA. If the files is not there in machineB then it should be there in machineC for sure so I will try copying the files from machineB first, if it is not there in machineB then I will try copying the same files from machineC. I am copying the files in parallel using GNU Parallel library and it is working fine. Currently I am copying 10 files in parallel. Below is my shell script which I have - #!/bin/bash export PRIMARY=/test01/primary export SECONDARY=/test02/secondary readonly FILERS_LOCATION=(machineB machineC) export FILERS_LOCATION_1=${FILERS_LOCATION[0]} export FILERS_LOCATION_2=${FILERS_LOCATION[1]} PRIMARY_PARTITION=(550 274 2 546 278) # this will have more file numbers SECONDARY_PARTITION=(1643 1103 1372 1096 1369 1568) # this will have more file numbers export dir3=/testing/snapshot/20140103 find "$PRIMARY" -mindepth 1 -delete find "$SECONDARY" -mindepth 1 -delete do_Copy() { el=$1 PRIMSEC=$2 scp david@$FILERS_LOCATION_1:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. || scp david@$FILERS_LOCATION_2:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. } export -f do_Copy parallel --retries 10 -j 10 do_Copy {} $PRIMARY ::: "${PRIMARY_PARTITION[@]}" & parallel --retries 10 -j 10 do_Copy {} $SECONDARY ::: "${SECONDARY_PARTITION[@]}" & wait echo "All files copied." Problem Statement:- With the above script at some point I am getting this exception - ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host And I guess the error is typically caused by too many ssh/scp starting at the same time. That leads me to believe /etc/ssh/sshd_config:MaxStartups and MaxSessions is set too low. But my question is on which server it is pretty low? machineB and machineC or machineA? And on what machines I need to increase the number? On machineA this is what I can find - root@machineA:/home/david# grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 root@machineA:/home/david# grep MaxSessions /etc/ssh/sshd_config And on machineB and machineC this is what I can find - [root@machineB ~]$ grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10 [root@machineB ~]$ grep MaxSessions /etc/ssh/sshd_config #MaxSessions 10

  Read the article

• red5 Install on Ubuntu 10.04? Problems with libslf4j

  - by mrgordon

  I've been trying for many days to get Red5 to install on Ubuntu 10.04. I finally managed to get red5.sh to stop hanging a few seconds in but now I'm getting the following error: Setting default logging context: default Exception in thread "main" java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.red5.server.Bootstrap.bootStrap(Bootstrap.java:135) at org.red5.server.Bootstrap.main(Bootstrap.java:50) Caused by: java.lang.NoSuchMethodError: org.slf4j.impl.StaticLoggerBinder.getContextSelector()Lch/qos/logback/classic/selector/ContextSelector; at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:121) at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:108) at org.red5.server.Launcher.launch(Launcher.java:51) ... 6 more I suspected that this had to do with slf4j not being installed or on my classpath. I installed logback and libslf4j-java from aptitude and I see related files in my red5 lib directories. For example: /usr/share/red5/lib/slf4j-api-1.6.1.jar /usr/share/red5/lib/log4j-over-slf4j-1.6.1.jar /usr/share/red5/lib/logback-classic-0.9.26.jar /usr/share/red5/lib/logback-core-0.9.26.jar /usr/share/red5/lib/jcl-over-slf4j-1.6.1.jar /usr/share/red5/lib/jul-to-slf4j-1.6.1.jar And I set my classpath to /usr/share/red5/lib/ Any ideas on where to proceed from here? There seem to be a lot of people having trouble getting 10.04 and red5 0.9 working together. I've tried red5-0.9.1.tar.gz and red5_0.9.0-RC1_all.deb. The libraries above should be all that are needed according to Red5's documentation and I got the latest version of each.

  Read the article

• Setting Ubuntu Global PATH for Ruby Enterprise Edition

  - by Wally Glutton

  Context: I recently installed Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like for this new version of Ruby to globally supersede (for all users, crontabs, etc) the older version in /usr/local/bin. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH line in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in the /etc/login.defs and /etc/crontab files. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the command: echo $PATH My shell is bash. My .bashrc doesn't not alter my PATH. I'm ssh'ed into the system for all testing. /opt/ruby_ee/ is a sym-link to /opt/ruby-enterprise-1.8.7-2011.03/

  Read the article

• wildcard Subdomain for localhost ubuntu 8.04

  - by makdotgnu

  Hi, I'm using ubuntu 8.04 and apache2, for my development I need a wildcard sub domains. for example If I go to abc.localhost/ it should redirect to localhost/ Can you guys help me out how I can achieve this in ubuntu 8.04. thank you.

  Read the article

• Getting AWStats to work in Ubuntu 12.04

  - by koogee

  I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

  Read the article

• Don't know why this small shell script wont work

  - by tominated

  Hi, I'm trying to make a small script to start up gunicorn for a python website I'm making. I have modified the script found at https://github.com/benoitc/gunicorn/blob/master/examples/gunicorn_rc slightly. Here's my version. #!/bin/sh GUNICORN=/usr/local/bin/gunicorn ROOT=/srv/mobile-site/app PID=/var/run/gunicorn.pid APP=mobilecms:app if [ -f $PID ]; then rm $PID fi cd $ROOT exec $GUNICORN -b 127.0.0.1:8080 -w 8 -k gevent --pidfile=$PID $APP When I try to run the script though, it shows this error /etc/init.d/gunicorn: 13: Syntax error: end of file unexpected (expecting "fi") Does anyone know what's wrong?

  Read the article

• Bitnami stacks compatible with Ubuntu 11?

  - by pthesis

  Has anyone successfully installed Bitnami native stacks on Ubuntu 11? After changing the bin file's permissions to allow it to be executable, I get the following error in the Terminal: bitnami-dokuwiki-2011-05-25a-0-linux-x64-installer.bin: 1: Syntax error: Unterminated quoted string for the Docuwiki stack, and bitnami-lampstack-3.0.6-0-linux-x64-installer.bin: 1: Syntax error: Unterminated quoted string for the LAMP stack.

  Read the article

• Set iDRAC IP Address on Ubuntu 12.04 without Reboot?

  - by BT643

  We have a Dell PowerEdge R720XD server and want to setup iDRAC, but this is a production server so we need to do it without a reboot if possible. We just need to set the IP address on the iDRAC but the servers do not have a front LCD panel so we cannot use this. The iDRAC will currently have the default 192.168.0.120 IP address but we are not on this IP range so cannot use this. We need to change it to 192.168.5.x. I've seen racadm mentioned, but before I start messing around installing this on Ubuntu, is this what we need? and will we be able to set the IP address on the DRAC with this? Thanks

  Read the article

• Confusion on networking service start/stop in Ubuntu

  - by Daniel Ball

  I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

  Read the article

• creating a new user Ubuntu

  - by Matt

  I am trying to new user that can sftp on a server....i did this ubuntu@ip-10-112-46-15:~$ sudo useradd jesse -p testPass ubuntu@ip-10-112-46-15:~$ sudo passwd jesse Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully but when i try to login via sftp I cant get in....am i missing something like adding a group or something the answer was PasswordAuthentication yes

  Read the article

• Apache2 Service started twice

  - by Relentless

  My apache2 web-server starts twice and wont bind, so i have to do this: sudo netstat -nap | grep 0.0.0.0:443 sudo kill -9 1243 sudo /etc/init.d/apache2 restart Is there any way i can make a script out of the code above so that i can run automatically on start up? I have Ubuntu 10.04, this happened after an update. UPDATE: ports.conf - Could this be cause it: <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> could it be listening to 443 twice? or do i need to add NameVirtualHost *:443

  Read the article

• strange Postfix logwatch log summary on my ubuntu vps

  - by DannyRe

  Hi I would be very thankful if someone could help me on explaining this logwatch summary of my postfix installation on my ubuntu 10.04 vps. I dont really know if this might be a normal log file because of the many authentication failed entries and foreign IP addresses. Any advise for a novice? Thx! ****** Summary ************************************************************************************* 113 SASL authentication failed 195 Miscellaneous warnings 8.419K Bytes accepted 8,621 8.419K Bytes delivered 8,621 ======== ================================================== 3 Accepted 60.00% 2 Rejected 40.00% -------- -------------------------------------------------- 5 Total 100.00% ======== ================================================== 2 5xx Reject relay denied 100.00% -------- -------------------------------------------------- 2 Total 5xx Rejects 100.00% ======== ================================================== 116 Connections 1 Connections lost (inbound) 116 Disconnections 3 Removed from queue 3 Delivered 1 Hostname verification errors ****** Detail (10) ********************************************************************************* 113 SASL authentication failed -------------------------------------------------------------- 113 92.24.80.207 host-92-24-80-207.ppp.as43234.net 113 LOGIN 113 generic failure 195 Miscellaneous warnings ------------------------------------------------------------------ 113 SASL authentication failure: cannot connect to saslauthd server: Permission denied 41 inet_protocols: IPv6 support is disabled: Address family not supported by protocol 41 inet_protocols: configuring for IPv4 support only 2 5xx Reject relay denied ----------------------------------------------------------------- 1 46.242.103.110 unknown 1 [email protected] 1 114.42.142.103 114-42-142-103.dynamic.hinet.net 1 [email protected] 1 Connections lost (inbound) -------------------------------------------------------------- 1 After RCPT 3 Delivered ------------------------------------------------------------------------------- 3 myhost.xx 1 Hostname verification errors ------------------------------------------------------------ 1 Name or service not known 1 46.242.103.110 broadband-46-242-103-110.nationalcablenetworks.ru === Delivery Delays Percentiles ============================================================ 0% 25% 50% 75% 90% 95% 98% 100%

  Read the article

• Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca

  - by Marlen T. B.

  I have recently (as of July 2012) bought a HP Pavilion dv6-6c40ca laptop. It came pre-installed with Windows 7 on an MBR. I installed Ubuntu 12.04 on it on a GPT partition in what I think is BIOS emulation mode. I made a BIOS-Grub partition so the install didn't fail. That is what it is for .. right? Now I want to upgrade to UEFI mode. How would I Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca. Or is it impossible? My laptop, despite its new age may not be UEFI 2.0+ capable. If it isn't how can I install a software UEFI (i.e. a DUET such as the one by tianocore). Or is this too impossible? A link to my laptop's specs is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137924&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=5218530 My laptop should have a UEFI given this link from HP http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01442956#N218. And from the link I draw a quote: That means most notebooks distributed with Windows Vista, and all notebooks distributed with Windows 7, have the UEFI environment. My laptop had Windows 7 Home Premium pre-installed. OK. Following the comments so far -- NOTE: I am trying to do this on an external drive so I can see if it works. I have partitioned the drive using GParted as a GPT drive. Created a 200MB partition at the beginning of the drive with a FAT32 file system. Given the 200MB partition a label of "EFI". Set the boot flag on the 200MB partition. What should a do next to install Ubuntu 12.04? Given the link: https://help.ubuntu.com/community/UEFIBooting#Selecting_the_.28U.29EFI_Graphic_Protocol In my first read through (just to see if I will understand everything before I start) I get to step 2.3 Install GRUB2 in (U)EFI systems The first line is Boot into Linux (any live ISO) preferably in UEFI mode. Um .. how do you tell what mode your live CD is in?! And how do you change it if the mode is wrong?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >